2mm 5mm Black Mirror 1.4310 Stainless Steel Sheet Plate
1.4310 2mm 5mm Stainless Steel Black Mirror Stainless Steel Sheet And Plates
1.4310 Stainless Steel Sheet Plate
Introduction
The steel also has good ductility and is easily formed, making it ideal for a variety of applications.
History of 1.4310 Stainless Steel
1.4310 stainless steel is a chromium-nickel austenitic stainless steel that has been widely used in various industries for over a hundred years. The key feature of 1.4310 is its high ductility, which allows it to be easily formed and machined into a variety of shapes and components.
1.4310 was first developed in Germany by Robert Bunsen and August Wilhelm von Hofmann in 1885, during their search for a corrosion-resistant alloy for use in chemical laboratories. They discovered that an alloy of chromium and nickel was resistant to the corrosive effects of acids and bases, and they christened this new material “chromium-nickel steel” (now known as austenitic stainless steel).
1.4310 quickly became popular in the chemical industry due to its superior corrosion resistance, and it was soon adopted by other industries such as food processing, medical devices, and architecture. Today, 1.4310 is one of the most commonly used stainless steels in the world, with applications ranging from kitchen utensils to surgical instruments.
Composition of 1.4310 Stainless Steel
1.4310 stainless steel is an austenitic chromium-nickel stainless steel that contains between 16 and 18% chromium and between 10 and 13% nickel. It is also known as AISI 430F and has a lower carbon content than 1.4301 stainless steel, making it softer and more ductile. 1.4310 stainless steel is often used in automotive applications, particularly in exhaust systems where it is resistant to corrosion from fuel and salt.
Properties of 1.4310 Stainless Steel
1.4310 stainless steel is a martensitic chromium-nickel stainless steel with good corrosion resistance and mechanical properties. The higher carbon content gives the material better tensile strength, while the chromium and nickel provide good resistance to oxidation and corrosion. 1.4310 stainless steel can be used in a variety of applications, including:
– Food processing equipment
– Chemical process equipment
– Pharmaceutical process equipment
– Marine environments
– Architectural cladding
Uses for 1.4310 Stainless Steel
1.4310 stainless steel is commonly used in the food and beverage industry for its excellent corrosion resistance. It is also widely used in the pharmaceutical and medical industries due to its cleanliness and sterilizability. Additionally, 1.4310 stainless steel is often used in the production of surgical instruments and other medical devices.
How to Weld 1.4310 Stainless Steel
1.4310 stainless steel is an austenitic chromium-nickel alloy that contains between 16 and 18% chromium and between 10 and 13% nickel. It has excellent corrosion resistance, making it ideal for welding.
To weld 1.4310 stainless steel, you will need:
– A welder
– Welding wire (stainless steel)
– A gas bottle (oxygen and acetylene)
– A face mask
– Safety goggles
– Gloves
Before you start welding, you need to set up your work area. Make sure that there is enough ventilation, as the fumes from welding can be toxic. You should also wear all of the safety gear listed above.
Now you’re ready to start welding! Begin by setting your welder to the correct settings for stainless steel welding. If you’re not sure, ask a qualified welder for advice. Once your welder is set up, slowly feed in the welding wire while holding down the trigger. Move the torch smoothly along the joint that you’re welding.
Grades of 1.4310 Stainless Steel
There are a few different grades of 1.4310 stainless steel, but the two most common are AISI 301 and DIN 1.4310.
AISI 301 is an austenitic chromium-nickel steel with a composition that includes 17% chromium and 7% nickel. This grade of stainless steel is known for its high strength and corrosion resistance, making it ideal for a wide range of applications.
DIN 1.4310 is a martensitic stainless steel with a slightly higher carbon content than AISI 301. This makes it less ductile and more resistant to wear and tear. However, it still offers good corrosion resistance and high strength, making it suitable for many industrial applications.
Conclusion
1.4310 stainless steel sheet plate is a versatile product that can be used for a variety of applications. It is perfect for those who are looking for an affordable option that will still provide them with the durability and quality they need. 1.4310 stainless steel sheet plate is an excellent choice for anyone in need of a reliable and affordable option.
Item | Stainless steel sheet(cold rolled or hot rolled) | ||
Thinckness | Cold rolled:0.15mm-10mm Hot rolled: 3.0mm-180mm | ||
Widthness | 8-3000mm | ||
Length | 1000mm-11000mm or as customer’ s requirement | ||
Finish | 2B, 2D, 4B, BA, HL, MIRROR, brush, NO. 1-NO. 4, 8K, and so on. | ||
Standard | ASME, ASTM, EN, BS, GB, DIN, JIS etc | ||
Price term | Ex-Work,FOB,CNF,CFR,CIF,FCA etc | ||
Payment term | TT, L/C, trade assurance etc | ||
Material | mainly201, 202, 304, 304L, 304H, 316, 316L,316Ti,2205, 330, 630, 660, 409L, 321, 310S, 410, 416, 410S, 430, 347H, 2Cr13, 3Cr13 etc 300series:301,302,303,304,304L,309,309s,310,310S,316,316L,316Ti,317L,321,347 200series:201,202,202cu,204 400series:409,409L,410,420,430,431,439,440,441,444 Others:2205,2507,2906,330,660,630,631,17-4ph,17-7ph, S318039 904L,etc Duplex stainless steel:S22053,S25073,S22253,S31803,S32205,S32304 Special Stainless Steel:904L,347/347H,317/317L,316Ti,254Mo | ||
Application range | Escalator, Elevator, Doors Furniture Production tools, Kitchen appliances, freezers, cold rooms Auto Parts Machinery and Packaging Equipment and Medical devices Transport system | ||
Package | clients’ requirement and Standard export sea-worthy packing | ||
Delivery time | 3-15 days subject to the clients’ requirement and quantity | ||
Quality | Prime | ||
Productivity | 4500 tons/month | ||
Note | We can produce other standard as the customers’ requirement |